ROPEX RES Resistron RES-5011 ...
skip introduction and move to features, modifications and ordering information...
The ROPEX Resistron 5000 Series of controllers utilize microprocessor technology for sensorless, closed-loop control of impulse heating elements. ROPEX controllers offer a range of configurations and protocols for simple plug-in system integration.
The use of ROPEX Resistron controls goes beyond impulse heat sealers, form fill machines, and converting equipment. ROPEX Resistron controllers also provide a solution for an extensive range of heating applications:
-
Heat-seal-bands and cutting-wires ... for hermetic sealing, and trimming of flexible films
-
Zebra and intermittent heat-seal-bands ... for skip seals and packaging ventilation
-
Impulse heating tools ... for activation of adhesives used in the bonding of non-thermoplastic materials
-
Flexible or rigid impulse blades ... for scoring, cutting, and bending of thermoplastics
-
Impulse heater coils ... for hot air bonding, and scoring of thermoplastics
-
2D and 3D contour heat-seal-elements ... for custom shaped heat-sealing, and heat-seal plus cuttings
ROPEX Resistron RES-5011 controller is at home in a diverse array of industries:
- Aerospace
- Automotive
- Cosmetics
- Chemical
- Dental
- Defense and Military
- Electronics
- Energy and Renewable Energy
- Food and Beverage
- General Industrial
- Healthcare and Hygiene
- Laboratory and Research
- Medical
- Pharmaceutical
Pictured: ROPEX Resistron RES-5011 (UL + EtherNet/IP)
The microprocessor technology endows the Ropex Resistron RES5011 RES Heat Seal Temperature Controller with previously unattainable capabilities:
-
Very simple operation thanks to AUTOCAL, the automatic zero calibration function.
-
Good dynamic response of the control system thanks to AUTOTUNE, which adapts automatically to the controlled system.
-
High precision thanks to further improved control accuracy and linearization of the heatsealing band characteristic.
-
High flexibility: The AUTORANGE function covers a secondary voltage range from 0.4 V to 120V and a current range from 30A to 500A.
-
Automatic adjustment to the line frequency in the range from 47Hz to 63Hz.
-
Increased protection against dangerous conditions, such as overheating of the heatsealing band.
The RES-5011 RESISTRON temperature controller is equipped with two EtherNet/IP interfaces. These interfaces can be used to control all of the controller functions and query controller information.
The ACTUAL temperature of the heatsealing band is supplied to the EtherNet/IP interface and to an analog 0 to 10V DC output. The real heatsealing band temperafure can thus be displayed on an external temperature meter (e.g. ATR-x).
The RES-5011 features an integrated error diagnosis function, which tests both the external system (heatsealing band, wiring etc.) and the internal electronics and outputs a selective error message in case of a fault.
To increase operational safety and interference immunity, all EtherNet/IP signals are electrically isolated from the controller and the heating circuit
Either coding switches on the temperature controller itself or the EtherNet/IP interface can be used to adapt to different heatsealing band alloys (Alloy 20, Low-Ex etc.) and set the required temperalure range (0 ... 300°C, 0 ... 500°C, etc.).
The compact design of the Ropex RES-5011 Resistron Temperature Controller with plug-in connections make this controller an ease to install.